The MES alternative that delivers results in weeks, not years.
TEEPTRAK gives you real-time OEE, downtime tracking and production monitoring without the complexity, cost and timeline of a traditional MES project.
Designed for plants that don't have two years to devote to an MES project
TEEPTRAK is designed for industrial sites that want MES-level visibility on their production without the heavy IT project, the long implementation timeline or the six-figure budget.
Without a real-time MES alternative, your workshop operates in the dark
IMany plants face the same dilemma: Excel isn’t enough, but a full MES is too complex, too expensive and takes too long. The result:
Detection
Many MES projects fail or are abandoned before delivering measurable ROI.
Reliability
Production data is collected manually, rarely accurate and hard to act on.
Lost Time
Operators spend more time filling in paperwork than producing.
Control
Teams lack real-time data to prioritize actions and hit production targets.
Without real-time downtime tracking, your workshop operates in the dark
In many plants, downtime is only discovered at the end of the shift. With TEEPTRAK, you get:
- Automatic stop detection : Every downtime event captured in real time, including micro-stops.
- Root cause analysis : Operators tag downtime reasons in one tap on a tablet.
- Live Pareto charts : See your top downtime causes instantly, shift by shift.
- Faster response : Maintenance teams react in minutes, not hours.
All-in-one, turnkey industrial solutions
Real-time downtime tracking. Detect every stop and micro-stop instantly.
Optimize cycle times and identify bottlenecks in manual assembly.
Monitor temperature, pressure and humidity in real time with IoT sensors
Catch every deviation before it becomes a defect with our IoT sensors.
How TEEPTRAK digitizes your downtime tracking in real time
TEEPTRAK combines software modules with sensors and operator tablets to capture, enrich and visualize all your critical line data.
|
MACHINE DATA Automatic machine data acquisitionConnected sensors and boxes retrieve machine signals (running times, stoppages, production quantities, scrap, cadence, etc.), even from older equipment. No need to change PLCs.
Compatible with all machines, whatever their age, make or technology. No modification of existing machines is required.
Installation in less than 30 minutes per machine, with no production downtime. Your data is up and running from day one.
|
 |
|
FAST, EASY DATA ENTRY Simplified operator input on industrial tabletsFor each loss, the operator can enter the actual cause of the stoppage or non-quality in just a few clicks. Machine data is thus enriched by the field, without paperwork.
Intuitive interface designed for the field, no need for complex training. In 2 clicks, the operator qualifies each stop directly from his line.
No more Excel files or paper reports. Downtime causes are categorized in real time, ready for immediate Pareto analysis.
|
 |
|
REAL-TIME CALCULATION Real-time OEE calculationAvailability, performance, quality, OEE,TEEP … all indicators are automatically calculated and continuously updated for each machine, line, team, workshop.
Zero manual calculations, zero delays. Your OEE updates second by second, so you don’t have to wait for the next day’s report to take action.
Instant multi-level overview from individual machine to entire plant. Compare teams, lines and workshops at a glance.
|
 |
|
DASHBOARDS & ANALYSIS Multi-site dashboards & loss analysisReal-time dashboards, stoppage and scrap paretos, comparisons between lines, teams, sites, periods… Your teams immediately see where the most critical losses are hiding.
Identify your biggest earnings potential in just one click. Automatic Paretos classify your losses by impact, so you know exactly where to start.
Multi-site access from anywhere. Whether you’re a plant manager or a team leader, you’ll be able to find your own tailor-made KPIs, from your smartphone to your workshop screen.
|
 |
|
MACHINE DATA Automatic machine data acquisitionConnected sensors and boxes retrieve machine signals (running times, stoppages, production quantities, scrap, cadence, etc.), even from older equipment. No need to change PLCs.
Compatible with all machines, whatever their age, make or technology. No modification of existing machines is required.
Installation in less than 30 minutes per machine, with no production downtime. Your data is up and running from day one.
|
|
|
FAST, EASY DATA ENTRY Simplified operator input on industrial tabletsFor each loss, the operator can enter the actual cause of the stoppage or non-quality in just a few clicks. Machine data is thus enriched by the field, without paperwork.
Intuitive interface designed for the field, no need for complex training. In 2 clicks, the operator qualifies each stop directly from his line.
No more Excel files or paper reports. Downtime causes are categorized in real time, ready for immediate Pareto analysis.
|
|
|
REAL-TIME CALCULATION Real-time OEE calculationAvailability, performance, quality, OEE,TEEP … all indicators are automatically calculated and continuously updated for each machine, line, team, workshop.
Zero manual calculations, zero delays. Your TRS/OEE updates second by second, so you don’t have to wait for the next day’s report to take action.
Instant multi-level overview from individual machine to entire plant. Compare teams, lines and workshops at a glance.
|
|
|
DASHBOARDS & ANALYSIS Multi-site dashboards & loss analysisReal-time dashboards, stoppage and scrap paretos, comparisons between lines, teams, sites, periods… Your teams immediately see where the most critical losses are hiding.
Identify your biggest earnings potential in just one click. Automatic Paretos classify your losses by impact, so you know exactly where to start.
Multi-site access from anywhere. Whether you’re a plant manager or a team leader, you’ll be able to find your own tailor-made KPIs, from your smartphone to your workshop screen.
|
|
Simpler than an MES, more powerful than a basic downtime logger
TEEPTRAK is a real-time production monitoring platform specializing in OEE, quality and processes. Unlike a basic downtime logger, TEEPTRAK combines machine data + operator input to give you the full context behind every stop.
Food industry
%
of product volume By reducing microstops.
Automotive
OEE points On several lines, attacking losses in real time.
Electronics
%
of unplanned stoppages thanks to immediate + standardized detection of stoppage causes.
International
%
Equipped plants From small businesses to major groups
Why choose TEEPTRAK as your real-time production monitoring software?
OEE Specialist
Multi-site, multi-language
Designed for operators
ROI in just a few weeks
The results our customers see every day
The tool was quickly adopted by all our production lines, thanks to its intuitive interface and clear, real-time dashboards. Operators use it on a daily basis for short-interval control, while supervisors rely on the 24-hour view to maintain performance.
Real-time OEE tracking, stoppage capture and empowerment of the field at 3 sites. Strengths: Fast deployment, operator-friendly interface, clear OEE and loss trees, actionable alerts, easy BI exports and APIs. Areas for improvement: More native templates for multi-site...
The tool has been deployed on all our automated equipment. The expected results are there for all to see: strong adoption by operators and technical teams, elimination of paper and Excel, rapid gains in OEE (work on micro-stops, team organization, etc.).
Ready to unlock the hidden performance of your production?
Let’s talk about your lines, your constraints and the gains TeepTrak can make for you.
Download the case study
Free POC
Request a demo
What is downtime tracking software?
Downtime tracking software automatically records every machine stop — planned, unplanned and micro-stoppages — in real time. TEEPTRAK gives operators and managers instant visibility on what’s causing lost production time.
Can downtime tracking software detect micro-stoppages?
Yes. TEEPTRAK’s sensors capture stops as short as a few seconds — the hidden losses that manual tracking always misses.
What's the difference between downtime tracking and an MES?
An MES is a heavy IT project (12-24 months, $150K-$500K+). TEEPTRAK deploys in weeks with no disruption and starts tracking downtime from day one.
How quickly will I see results?
Most clients gain 10 to 15 OEE points within the first weeks. Installation takes less than 20 minutes per machine, with zero production downtime.
How does TEEPTRAK work with my CMMS?
TEEPTRAK is plug-and-play and works alongside your existing CMMS, ERP or quality tools. Data can be exported via API for seamless integration.