Catch defects at the station.
Cut scrap & rework by 40%.
QualTrak replaces paper checklists with guided digital self-checks at the workstation. A failed check triggers an alert the moment it happens — not at end of shift, not after the batch ships.
app.teeptrak.com/qualtrak · Line 2
LIVE
Weight check failed · batch 833 · alert sent to quality lead
QualTrak runs in plants of
Paper checklists hide defects until it's too late. QualTrak surfaces them in real time.
Check plans operators actually follow
Guided self-checks at the workstation, in your vocabulary, at the frequency you define per product. No paper to lose, no end-of-shift transcription, no skipped boxes.
Non-conformities alert the right person, instantly
A failed check raises an alert in the second it happens — to the quality lead, the shift leader, whoever you choose. Stop producing bad parts after one part, not after one shift.
Traceability that survives any audit
Every check is time-stamped and tied to product, batch, station and operator. ISO 9001 and customer audits go from a week of binder archaeology to a filtered export.
How QualTrak works
Three steps between a quality check and a decision you can act on.
Configure your check plans
Products, control points, tolerances and frequencies — built on the platform from your existing quality plan, not in your PLC or MES.
Operators self-check at the station
The tablet prompts the right check at the right time. Pass or fail, photo if needed — a few taps and production continues.
Guided, zero paperSupervise quality in real time
Live scrap and conformity by line, defect Paretos, instant NC alerts, full audit trail — and raw-data APIs for your QMS or BI.
Station → line → plantQuality supervision, exactly as your team will see it
Scrap and conformity, live, by line
See conformity rates and open non-conformities update as checks are performed — across every line, from any browser.
● Surface — batch 829 · 1h 05
The defect Pareto that builds itself
Every check feeds the defect tree. By Friday you know your top three defect causes — by product, line, station or shift.
An audit trail that writes itself
Every check — pass or fail — is stamped with product, batch, station, operator and time. Audit prep becomes a filtered export, not a week in the archive room.
Know about the defect after one part, not one shift
Configurable alerts to any smartphone — failed check, scrap threshold crossed, NC left open too long. React while the batch can still be saved.
10:31 · station 30 · NC-2114 raised
10:18 · 4.1% vs 3% target
09:55 · root cause: tooling wear
Guided checks. A few taps. Zero paper.
Adoption is where quality projects die. QualTrak's tablet interface guides the operator through each check at the right moment — pass, fail, photo. No typing, no menus, no blame.
Installed in five steps — without stopping the machine
Set up the station
Tablet + platform account — no machine wiring required
Load your quality plan
Products, control points, tolerances and frequencies
Position the tablet
At the control station — one tablet can serve several stations
Configure
Defect tree, alert rules and escalation paths
Start checking
Self-checks guided and traced live, from minute one
How much are scrap and rework costing you?
Drag the sliders. Estimate based on a conservative −30% scrap reduction — QualTrak customers reach −40%.
per year, at −30% scrap & rework
≈ 10,800 parts saved from the bin
Find my scrap savings →Choose your QualTrak
QualTrak
Digital self-checks, NC alerts, defect Paretos and full traceability on the lines you choose — independent of any other system.
QualTrak + PerfTrak
One tablet, two jobs: loss qualification and quality checks side by side. See quality and OEE on the same dashboards, with one login.
QualTrak API
Feed checks, NCs and traces straight into your QMS, MES or BI via standard APIs — QualTrak handles the shop floor, your systems stay the master.
The results our customers see every day
"Quickly adopted by all our production lines thanks to its intuitive interface and clear, real-time dashboards. Operators use it daily for short-interval control."
"Real-time OEE tracking and stoppage capture at 3 sites. Fast deployment, operator-friendly interface, clear loss trees, actionable alerts, easy BI exports and APIs."
"Deployed on all our automated equipment. Strong adoption by operators, elimination of paper and Excel, rapid OEE gains on micro-stops and team organization."
Your data, wherever you need it
Standard APIs and raw-data access. Feed your BI, your ERP, your data lake.
Frequently asked questions
See your scrap shrink — on your lines, with your numbers
A 30-minute working session with a TeepTrak engineer. We'll map your defect profile and show you QualTrak running on checks like yours.