Make performance impossible to ignore.
MoniTrak turns your live production data into shop-floor displays the whole team reads at a glance — OEE, output vs target, takt and Andon status, refreshed every few seconds. When everyone sees the same number, everyone reacts to it.
- Live on any screen in under an hour
- Fed by PerfTrak, your PLC, OPC UA or MES
- Zero training — built to be read from across the floor
Assembly 2 — Line viewLIVEA number on a screen changes behaviour.
Spreadsheets get opened once a day. A wall everyone walks past gets read every minute — and acted on.
Targets nobody can hide from
Output versus target, live on the line. The team self-corrects before the shortfall reaches the morning meeting — not after.
Andon everyone notices
A stop or a drift turns the area screen red for all to see. Supervisors react in minutes, not at end of shift.
One source of truth
The same live numbers in the control room, on the line and in the boardroom. No more dueling spreadsheets at the review.
Build the view each area needs.
Drag-and-drop layouts per workstation, line or plant — KPIs, charts, targets and Andon, your way.
Live OEE, line by line
Availability, performance and quality at a glance, refreshed continuously across the area.
Are we on plan, right now?
A single bar the operator reads from the workstation — ahead or behind, no interpretation needed.
Who needs help, now
Every line a status tile — running, stopped, changeover — escalating when a call goes unanswered.
A little friendly pressure
Rank shifts, teams or lines on the KPI that matters this week. Recognition that drives itself.
From raw data to a wall the floor reads — in three steps.
Connect your data
Pull live KPIs from PerfTrak, your PLC, OPC UA, MES or an Excel/API feed. No new sensors, no data project.
Design your screens
Drag and drop the indicators, charts, targets and Andon each area needs. One layout per workstation, line or plant.
Broadcast live
Push to TVs, monitors, tablets or a video wall. Auto-refresh every few seconds — nothing to click, nothing to maintain.
Your data, on the wall — wherever it lives.
Do we need new hardware?
Just a screen and a small media player. Any TV or monitor works, and the data comes from systems you already run — PerfTrak, your PLC, OPC UA or MES. A screen is typically live in under an hour.
Does it work without PerfTrak?
Yes. MoniTrak displays live KPIs from any source — OPC UA, MES, SQL or an Excel/API feed. If you already run PerfTrak, your OEE, stops and losses appear instantly with no extra setup.
Can each area show different KPIs?
Absolutely. Every screen has its own drag-and-drop layout — a workstation can show its own takt and Andon while the plant entrance shows site-wide OEE and a shift league table.
How fast can we go live?
Under an hour per screen. Connect the data source, pick a layout, point a screen at it — and it broadcasts.
Put your numbers where the work happens.
A 30-minute working session with a TeepTrak engineer — we'll design a screen on your real KPIs and show it running on cases like yours.