Real-time production monitoring software for visible gains in just a few weeks.
TEEPTRAK connects all your machines, whatever their age, and gives you full visibility on your production performance in real time, without a complex MES project.
Designed for plants that don't have two years to devote to an MES project
TEEPTRAK is designed for industrial sites that want to monitor their production in real time, track performance across every line and involve operators in continuous improvement, without having to set up a complex MES over several years.
Without real-time production monitoring, your workshop operates in the dark
In many plants, production tracking is still based on Excel spreadsheets, paper sheets and manual readings. The result:
Detection
Stops, slowdowns and micro-stoppages go untracked or are reported too late.
Reliability
Production data is collected manually, rarely accurate and hard to act on.
Lost Time
Operators spend more time filling in paperwork than producing.
Control
Teams lack real-time data to prioritize actions and hit production targets.
All-in-one, turnkey production monitoring solutions
1. Real-time production tracking. Detect losses and optimize performance instantly.
2. Optimize cycle times and identify bottlenecks in manual assembly.
3. Monitor temperature, pressure and humidity in real time with IoT sensors.
4. Catch every deviation before it becomes a defect with our IoT sensors.
All-in-one, turnkey industrial solutions
Real-time production tracking. Detect losses and optimize performance instantly.
Optimize cycle times and identify bottlenecks in manual assembly.
Monitor temperature, pressure and humidity in real time with IoT sensors.
Catch every deviation before it becomes a defect with our IoT sensors.
How TEEPTRAK digitizes your production monitoring in real time
TEEPTRAK combines software modules with sensors and operator tablets to capture, enrich and visualize all your critical line data.
|
MACHINE DATA Automatic machine data acquisitionConnected sensors and boxes retrieve machine signals (running times, stoppages, production quantities, scrap, cadence, etc.), even from older equipment. No need to change PLCs.
Compatible with all machines, whatever their age, make or technology. No modification of existing machines is required.
Installation in less than 30 minutes per machine, with no production downtime. Your data is up and running from day one.
|
 |
|
FAST, EASY DATA ENTRY Simplified operator input on industrial tabletsFor each loss, the operator can enter the actual cause of the stoppage or non-quality in just a few clicks. Machine data is thus enriched by the field, without paperwork.
Intuitive interface designed for the field, no need for complex training. In 2 clicks, the operator qualifies each stop directly from his line.
No more Excel files or paper reports. Downtime causes are categorized in real time, ready for immediate Pareto analysis.
|
 |
|
REAL-TIME CALCULATION Real-time OEE calculationAvailability, performance, quality, OEE,TEEP … all indicators are automatically calculated and continuously updated for each machine, line, team, workshop.
Zero manual calculations, zero delays. Your OEE updates second by second, so you don’t have to wait for the next day’s report to take action.
Instant multi-level overview from individual machine to entire plant. Compare teams, lines and workshops at a glance.
|
 |
|
DASHBOARDS & ANALYSIS Multi-site dashboards & loss analysisReal-time dashboards, stoppage and scrap paretos, comparisons between lines, teams, sites, periods… Your teams immediately see where the most critical losses are hiding.
Identify your biggest earnings potential in just one click. Automatic Paretos classify your losses by impact, so you know exactly where to start.
Multi-site access from anywhere. Whether you’re a plant manager or a team leader, you’ll be able to find your own tailor-made KPIs, from your smartphone to your workshop screen.
|
 |
|
MACHINE DATA Automatic machine data acquisitionConnected sensors and boxes retrieve machine signals (running times, stoppages, production quantities, scrap, cadence, etc.), even from older equipment. No need to change PLCs.
Compatible with all machines, whatever their age, make or technology. No modification of existing machines is required.
Installation in less than 30 minutes per machine, with no production downtime. Your data is up and running from day one.
|
|
|
FAST, EASY DATA ENTRY Simplified operator input on industrial tabletsFor each loss, the operator can enter the actual cause of the stoppage or non-quality in just a few clicks. Machine data is thus enriched by the field, without paperwork.
Intuitive interface designed for the field, no need for complex training. In 2 clicks, the operator qualifies each stop directly from his line.
No more Excel files or paper reports. Downtime causes are categorized in real time, ready for immediate Pareto analysis.
|
|
|
REAL-TIME CALCULATION Real-time OEE calculationAvailability, performance, quality, OEE,TEEP … all indicators are automatically calculated and continuously updated for each machine, line, team, workshop.
Zero manual calculations, zero delays. Your TRS/OEE updates second by second, so you don’t have to wait for the next day’s report to take action.
Instant multi-level overview from individual machine to entire plant. Compare teams, lines and workshops at a glance.
|
|
|
DASHBOARDS & ANALYSIS Multi-site dashboards & loss analysisReal-time dashboards, stoppage and scrap paretos, comparisons between lines, teams, sites, periods… Your teams immediately see where the most critical losses are hiding.
Identify your biggest earnings potential in just one click. Automatic Paretos classify your losses by impact, so you know exactly where to start.
Multi-site access from anywhere. Whether you’re a plant manager or a team leader, you’ll be able to find your own tailor-made KPIs, from your smartphone to your workshop screen.
|
|
Concrete results for our industrial customers
Food industry
%
of product volume By reducing microstops.
Automotive
OEE points On several lines, attacking losses in real time.
Electronics
%
of unplanned stoppages thanks to immediate + standardized detection of stoppage causes.
International
%
Equipped plants From small businesses to major groups
Why choose TEEPTRAK as your real-time production monitoring software?
OEE Specialist
Multi-site, multi-language
Designed for operators
ROI in just a few weeks
The results our customers see every day
The tool was quickly adopted by all our production lines, thanks to its intuitive interface and clear, real-time dashboards. Operators use it on a daily basis for short-interval control, while supervisors rely on the 24-hour view to maintain performance.
Real-time OEE tracking, stoppage capture and empowerment of the field at 3 sites. Strengths: Fast deployment, operator-friendly interface, clear OEE and loss trees, actionable alerts, easy BI exports and APIs. Areas for improvement: More native templates for multi-site...
The tool has been deployed on all our automated equipment. The expected results are there for all to see: strong adoption by operators and technical teams, elimination of paper and Excel, rapid gains in OEE (work on micro-stops, team organization, etc.).
Ready to unlock the hidden performance of your production?
Let’s talk about your lines, your constraints and the gains TeepTrak can make for you.
Download the case study
Free POC
Request a demo
What is production monitoring software?
Production monitoring software tracks machine performance, downtime and output in real time. TEEPTRAK gives operators and managers instant visibility on what’s happening on the shop floor no waiting for end-of-shift reports.
Can production monitoring software connect to older machines?
Yes. TEEPTRAK is compatible with 95% of industrial machines, including legacy equipment. No machine modification required.
How quickly will I see results?
Most clients gain 10 to 15 OEE points within the first weeks. Installation takes less than 20 minutes per machine, with zero production downtime.
How does TEEPTRAK work with my existing systems?
TEEPTRAK is plug-and-play no complex integration required. It works alongside your existing ERP, CMMS or quality tools and can export data via API.
une autre questions10:05How does TEEPTRAK work with my existing systems?
TEEPTRAK is plug-and-play no complex integration required. It works alongside your existing ERP, CMMS or quality tools and can export data via API. No IT overhaul, no disruption to your current workflow.