See what your machines are really doing
Real-time OEE monitoring and production analytics, deployed in 48 hours, no MES overhaul required.
450+ factories · 30+ countries · 4.7/5 G2 + Capterra
TRUSTED BY MANUFACTURERS WORLDWIDE
One platform to recover the output you are missing.
TeepTrak captures every stop on every machine, lets operators qualify the cause in two taps, and gives the whole plant one OEE number to trust. No MES overhaul, live in under an hour.
Free trial
Start your 60-Day Guided Pilot
- One pilot line, fully equipped and connected in under an hour.
- Guided start to finish by a TeepTrak engineer.
- If we do not find at least 10% in hidden losses in 60 days, you pay nothing.
Free POC
A TeepTrak engineer sets up your pilot line. No commitment.
For plant leaders and ops directors
Your real performance, without the spreadsheet wars.
Most plants run 10–15 OEE points below what their equipment can deliver - and the loss hides in stops nobody logs. TeepTrak captures every stop on every machine automatically. Operators qualify causes in two taps. Your team gets one trusted number instead of three conflicting reports.
- Automatic data collection - no PLC integration required
- Pareto of stop causes, built live as production runs
- Multi-plant dashboards for corporate visibility
- Reports ready for ISO 9001 and customer audits
multi-plant viewLIVE
Cause qualified by operator: misfeed
Built to connect. Designed to scale.
Connect
Any machine, any age
Plug-and-play sensors connect any make or model in under an hour. No PLC work, no production stop.
Capture
Every loss, automatically
Stops, micro-stops, slow cycles and scrap captured live, down to 2-minute events nobody logs by hand.
Integrate
Works with your stack
Standard APIs and exports to SAP, Oracle and Power BI, with reports ready for ISO 9001 audits.
Scale
From one line to every plant
One trusted OEE number and multi-plant dashboards, proven across 450+ factories in 30+ countries.
Connects to any machine
From legacy presses to new robots, and the systems above them.
Open protocols and direct I/O on the floor, with data flowing up to the tools your teams already run on. Older equipment is fully supported.
Machine protocols
Controllers and systems
The live loss loop
Every loss, caught and closed in real time.
Turn insight into action
Every second counts. Live alerts route the right problem to the right person, so changeovers, micro-stops and drifts get fixed before they cost you output.
Intelligent solutions
One platform for modern manufacturers.
One live OEE number the whole plant trusts, built automatically as production runs, from machine to plant level.
See real-time OEEEvery stop captured and ranked the moment it happens, so the biggest losses are obvious and the short ones stop hiding.
Cut downtimeTrack scrap, conformity and operator self-checks live, and tie quality losses back to the machine and the cause.
Track qualityCompare lines, shifts and plants on one trusted scale, with reports ready for ISO 9001 and customer audits.
Compare plantsOEE today · Machining 1
live, updated every cycle
Top losses · today
captured automatically, ranked live
Quality · last hour
OEE by line · morning shift
From our founder
“Every factory already has the capacity it is looking for. It just can’t see it yet.”
François Coulloudon founded TeepTrak with one conviction: performance data should be effortless to capture and impossible to argue with. Ten years and 450+ factories later, that’s still what we build every day, for plants in 30+ countries.
Our vision for smarter factories - 2 min
Proven on the floor
Real plants. Real numbers. Verified on the line.
"We'd accepted our line speed as just how things were. The week TeepTrak went live we finally saw the micro-stops nobody had been logging. The output had been there the whole time, we just couldn't see it."
€230k / year recovered
+12 OEE points and a 6-week payback across 12 lines in 3 plants.
Verified result"Paper and Excel were hiding our real losses. Once the short stops were captured automatically, the team had one number to work from. We added 15 OEE points in six months without buying a single new machine."
+15 OEE points in 6 months
Verified resultHow manufacturers benefit with TeepTrak
Free resources
Start finding losses today. No email required.
The tools thousands of production teams download every month. Pick the one you need, instant access.
The OEE dashboard 450+ plants run on
The exact Excel dashboard our customers use to track OEE by line and by shift. Download it, plug in your numbers, and find your first losses today.
- Pre-built OEE by line and shift
- Availability, performance and quality split out
- Loss Pareto, ready for your data
Calculate any machine’s OEE in 5 minutes
Availability times Performance times Quality, already wired up. Drop in three numbers and get a clean OEE figure you can defend.
- Plug-and-play OEE formula
- Worked example included
- Works for any machine or line
Do you really need a 2-year MES project?
Twelve questions to decide between a long MES rollout and two weeks of TeepTrak. Used in more than 100 evaluations.
- 12 decision questions
- Scoring you can share internally
- Built from 450+ deployments
See what hidden downtime costs you
Move four sliders and get an instant, conservative estimate of the capacity you could recover. No signup, right here on this page.
- Instant estimate, no email
- Based on +8 OEE points, conservatively
- Customers average +10 to +15
Frequently asked questions
Ready to see your hidden losses?
Your lines, your losses, your numbers, in a 30-minute working session with a TeepTrak engineer. Or start a 60-Day Guided Pilot on one line.
Request a Demo →