Last updated: 21 November 2026 · Written by the TEEPTRAK team for plant, production and continuous-improvement managers.
An AI agent in manufacturing is a system built on a large language model that carries out a task in several steps across several systems, such as reading the night’s stops, drafting a work order and notifying the right technician, instead of only answering a question. The agents that work in plants today read production data, draft actions and wait for a person to approve them. How useful an agent is depends on the data it can read: it can only reason about the stops, counts and records that have been captured.
What is an AI agent in manufacturing?
A chatbot answers. An agent acts. Siemens, which added AI agents to its Industrial Copilot range in May 2025, draws the line this way: the copilot is the interface people talk to; the agents behind it execute complete workflows, coordinated by an orchestrator. Anthropic’s Claude for Manufacturing, launched on 12 November 2026, takes a similar route with 17 skills that end with a review by the person responsible. Microsoft describes a Factory Operations Agent scenario in Copilot Studio built on MES and quality system data, sensor data and OEE.
| AI assistant (chat) | AI agent | |
|---|---|---|
| Trigger | A person asks a question | An event, a schedule or a request |
| Steps | One answer | Several steps, several systems |
| Output | Text | Drafts, tickets, messages, updates |
| Main risk | A wrong answer that someone reads | A wrong action that someone has to undo |
Which agentic AI use cases work in manufacturing today?
The ones where each step is checkable and the final step is approved by a person. Six that plants can run with 2026 tools:
| Agent | What it does | Data it reads | Human step |
|---|---|---|---|
| Shift handover | Summarises output, OEE, main losses and open issues for the next shift | Stop and count data, shift notes | Team leader checks before the meeting |
| Downtime triage | Groups the night’s stops, flags anything unusual, suggests where to look first | Every stop with duration and reason | Supervisor confirms the priority |
| Maintenance work order | Drafts the order from a breakdown, with history of similar failures | Stop records, CMMS history, manuals | Maintenance lead approves and assigns |
| Quality investigation | Collects records for an NCR or 8D, finds similar past defects | Inspection results, batch records, past reports | Quality engineer validates root cause |
| Quote preparation | Pulls past job costs and routings, drafts the quote | ERP records, drawings | Estimator checks and sends |
| Schedule replanning | Proposes a new sequence after a breakdown or a late material | Orders, routings, real machine availability | Planner accepts or edits |
Notice the pattern. The agent saves the collecting, sorting and drafting. The decision stays with the person who would be accountable for it anyway.
What does an AI agent need to read on the shop floor?
Three layers, and the first is the one most often missing:
- Machine data captured automatically: states, every stop with start time, duration and reason, part counts, cycle times. Without it, the shift handover and downtime triage agents summarise a paper log.
- Business records: orders, routings, maintenance history, quality reports, from ERP, MES, CMMS and document storage.
- Rules: which systems the agent may read, which it may write to, and who approves what.
In practice agents reach this data through connectors and APIs; the Model Context Protocol (MCP) is one common standard for exposing a system to an AI agent. Whatever the plumbing, an agent can only reason about stops that were recorded. Anthropic itself, at the Claude for Manufacturing launch, cites a 2025 Manufacturing Leadership Council survey in which 79% of manufacturers still enter data manually.
How do you keep AI agents safe in a factory?
- Read-only first. Start every agent with read access only. Add write access one system at a time, once the drafts are consistently right.
- A person approves every change. Work orders, schedules, quotes and supplier requests are drafts until someone with authority releases them. Siemens says users keep control over which tasks they delegate; Anthropic says Claude for Manufacturing does not operate equipment.
- No control of equipment. Agents that change setpoints or start machines are a different category with safety requirements of their own.
- Show the evidence. Every recommendation links to the records it used, so it can be checked in minutes.
- Plan for the wrong action. Grant Thornton’s 2026 survey found only 7% of manufacturers have a tested AI incident response plan. Decide before go-live who is alerted and how an action is reversed.
Where should you start with AI agents?
With the shift handover or the morning downtime review. Both run every day, both are written by hand today in many plants, both are easy to check against what the team saw, and neither changes anything in a system of record. If the agent’s draft matches what the supervisor would have written, after two weeks you have both a time saving and the trust to try a second agent, such as work order drafting.
Where does TEEPTRAK fit?
TEEPTRAK is not an AI agent. It is the machine data layer agents read from.
- Every machine: PLC signal, non-intrusive clip-on sensor or OPC UA, no change to the PLC, under an hour per machine.
- Every stop down to 2 minutes, with its reason, tagged by the operator on the workstation tablet while it happens.
- Open data: Excel exports and standard APIs to SAP, Oracle or Power BI, which agents and assistants can read.
- Automatic shift reports, a reference to check any agent’s summary against.
TEEPTRAK runs in more than 700 factories in over 30 countries. At Hutchinson, OEE on automated lines rose from 47% to 72%. Related reading: AI in manufacturing: use cases that work, AI tools for OEE and downtime and Claude for Manufacturing and machine data.
Frequently asked questions
What is the difference between generative AI and agentic AI in manufacturing?
Generative AI produces text, code or images in response to a prompt. Agentic AI uses that ability to plan and carry out several steps across systems, such as reading stop data, drafting a work order and notifying a technician.
Can AI agents run a production line on their own?
Not with the tools launched for manufacturing in 2025 and 2026. They draft and recommend; people approve. Controlling equipment is a separate category with its own safety requirements.
Do AI agents need an MES?
They need access to reliable production data. That can come from an MES, a machine monitoring system or both, through exports or APIs.
What is MCP and why does it matter for manufacturing?
The Model Context Protocol is an open standard for connecting AI agents to systems and data. It lets a plant expose a system to an agent once, rather than building a separate integration for each AI tool.
How do you measure whether an AI agent is worth it?
Time saved per day on the task it drafts, the share of drafts approved without changes, and for production agents the effect on downtime or OEE against a baseline measured before go-live.
Free kit: is your machine data ready for AI agents?
Excel file with a stop-log template, an OEE and cost-of-downtime calculation, 10 prompts for AI assistants and a 12-question data readiness check.
Want every stop captured automatically? Book a TEEPTRAK demo.
0 Comments