{"id":122024,"date":"2026-07-24T18:01:35","date_gmt":"2026-07-24T18:01:35","guid":{"rendered":"https:\/\/teeptrak.com\/?p=122024"},"modified":"2026-07-24T21:24:11","modified_gmt":"2026-07-24T21:24:11","slug":"oee-vs-teep-vs-ooe-vs-utilization","status":"publish","type":"post","link":"https:\/\/teeptrak.com\/en\/oee-vs-teep-vs-ooe-vs-utilization\/","title":{"rendered":"OEE vs TEEP vs OOE vs Utilization: Manufacturing Metrics Explained (2026)"},"content":{"rendered":"

Short answer:<\/strong> OEE, OOE, TEEP and Utilization all measure manufacturing productivity, but each uses a different time window. OEE<\/a><\/strong> measures how well you run during planned production time; OOE<\/strong> widens the lens to all scheduled operating time; TEEP<\/strong> goes all the way to calendar time (OEE \u00d7 Utilization) to reveal hidden capacity; and Utilization<\/strong> is the share of calendar time you actually schedule production. Use OEE for daily improvement and TEEP for capacity and investment decisions.<\/p>

Metric<\/th>What it measures<\/th>Time basis<\/th>Best used for<\/th><\/tr><\/thead>
OEE<\/strong><\/td>Availability \u00d7 Performance \u00d7 Quality<\/td>Planned production time<\/td>Day-to-day loss reduction<\/td><\/tr>
OOE<\/td>Overall operations effectiveness<\/td>All scheduled operating time (incl. unplanned)<\/td>A stricter availability view<\/td><\/tr>
TEEP<\/td>OEE \u00d7 Utilization<\/td>All calendar time (24\/7)<\/td>Hidden capacity & capex decisions<\/td><\/tr>
Utilization<\/td>Scheduled time \u00f7 calendar time<\/td>All calendar time<\/td>Add a shift vs buy a machine<\/td><\/tr><\/tbody><\/table><\/figure>

What is OEE?<\/h2>

OEE (Overall Equipment Effectiveness) is the product of three factors \u2014 Availability, Performance and Quality \u2014 measured against planned production time<\/strong> (the time you intended to run, excluding planned shutdowns). It answers: when we meant to be producing, how much fully-good output did we actually get? It is the go-to metric for daily improvement. See our guide to calculating OEE<\/a>.<\/p>

What is OOE?<\/h2>

OOE (Overall Operations Effectiveness) uses the same three factors but a wider time basis: it counts all the time the operation is scheduled to be open, including unplanned stoppages. Because the denominator is larger, OOE is a stricter view of availability and is useful when you want losses judged against the full operating window, not just planned run time.<\/p>

What is TEEP?<\/h2>

TEEP (Total Effective Equipment Performance) is OEE \u00d7 Utilization<\/strong>, measured against all calendar time<\/strong> (24 hours a day, 7 days a week). It exposes hidden capacity: a line can have world-class OEE yet a low TEEP simply because it only runs one shift. TEEP is the metric for capacity planning and capex decisions.<\/p>

What is Utilization?<\/h2>

Utilization is the share of total calendar time that you actually schedule production (scheduled time \u00f7 calendar time). It is the bridge between OEE and TEEP, and it answers a strategic question: before buying another machine, how much unused calendar time could you convert by adding a shift?<\/p>

Which metric should you track?<\/h2>

Track OEE<\/strong> for continuous improvement on the floor, and TEEP<\/strong> when you are weighing capacity and investment. Utilization tells you whether the gap is a scheduling choice or a true capacity limit. To see where your OEE stands versus your sector, check the 2026 OEE benchmarks<\/a>, and compare tools in our OEE software guide<\/a>.<\/p>

See TeepTrak measure OEE and TEEP on your lines \u2014 book a demo<\/strong><\/a><\/p>

Frequently asked questions<\/h2>

Is TEEP always lower than OEE?<\/h3>

Yes. TEEP equals OEE multiplied by Utilization, and Utilization is at most 100%, so TEEP is always less than or equal to OEE. The gap is the calendar time you are not scheduling.<\/p>

What is a good OEE versus a good TEEP?<\/h3>

World-class OEE is around 85%. TEEP is usually much lower because most plants do not run 24\/7, so a strong TEEP depends on both high OEE and high scheduled utilization.<\/p>

What is the difference between OEE and OOE?<\/h3>

The time basis. OEE is measured against planned production time, while OOE is measured against all scheduled operating time including unplanned stoppages, making it a stricter availability view.<\/p>

Do I need to track all four metrics?<\/h3>

No. Start with OEE for daily improvement, add TEEP and Utilization when you are making capacity or investment decisions. OOE is optional and used when you want a stricter operating-time view.<\/p>