{"id":117416,"date":"2026-06-21T19:08:20","date_gmt":"2026-06-21T19:08:20","guid":{"rendered":"https:\/\/teeptrak.com\/oee-aerospace-defense-as9100\/"},"modified":"2026-06-21T19:08:26","modified_gmt":"2026-06-21T19:08:26","slug":"oee-aerospace-defense-as9100","status":"publish","type":"post","link":"https:\/\/teeptrak.com\/en\/oee-aerospace-defense-as9100\/","title":{"rendered":"OEE for Aerospace and Defense (AS9100)"},"content":{"rendered":"<p class=\"tt-deck\"><strong>In aerospace and defense, the line is low-volume and high-mix, cycle times are long, and AS9100 demands traceability on every part. That mix hides a trap: a CNC cell can look busy all shift and still run a poor overall equipment effectiveness. This guide shows an operations director how to separate utilization from true OEE, where the losses really sit, and how to make the number trustworthy without disturbing certification.<\/strong><\/p>\n<h2>Utilization is not OEE, and high-mix proves it<\/h2>\n<p>In <strong>aerospace manufacturing OEE<\/strong> work, the most expensive misunderstanding is to read machine utilization as if it were overall equipment effectiveness. A five-axis cell can show high spindle-on time and still deliver a mediocre OEE, because long programs, in-process probing and frequent setups absorb hours that never reach the availability or performance accounts in a clean way. ISO 22400-2 keeps availability, performance and quality distinct for exactly this reason.<\/p>\n<p>Low volume and high mix make the gap wider. When a cell runs a different part every few hours, setup, first-article inspection and fixturing dominate the day. Counting busy spindle time flatters the picture, while true OEE shows where the program, the fixture or the tooling strategy is quietly costing capacity. The discrete-manufacturing average sits near 66 percent, the top quartile near 75 percent, and world-class near 85 percent, but you cannot move toward those numbers until you measure the right one.<\/p>\n<h3>Where aerospace OEE leaks<\/h3>\n<ul>\n<li>Long-cycle availability loss: setups, first-article inspection and tool changes between short runs.<\/li>\n<li>Performance loss: conservative feeds and speeds, in-cycle probing and unlogged micro-stops.<\/li>\n<li>Quality loss: scrap and rework on high-value forgings and titanium, where one bad part is costly.<\/li>\n<li>Hidden factory: 30 to 45 percent of capacity is often lost to causes no one is timing.<\/li>\n<li>Manual logs overstate OEE by 8 to 15 points, which masks the real loss on a high-mix cell.<\/li>\n<\/ul>\n<h2>Traceability without disturbing AS9100<\/h2>\n<p>An AS9100 plant cannot bolt on a black box that no auditor can explain. Real-time OEE monitoring belongs alongside the quality system, not inside the validated record path, capturing machine state and reason codes automatically so the data is consistent shift after shift. A TeepTrak Box reads the cell at the edge with no PLC project, which keeps the controls and the certified configuration untouched.<\/p>\n<p>With automatic capture, every stop carries a time-stamped reason code that operators confirm rather than reconstruct from memory. That gives engineering an honest Pareto of the Six Big Losses by part number and by cell, so improvement work targets the operations that actually erode OEE on the candidate line.<\/p>\n<figure class=\"wp-block-table\">\n<table>\n<thead>\n<tr>\n<th>CNC cell loss<\/th>\n<th>What it looks like<\/th>\n<th>OEE bucket<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Setup and changeover<\/td>\n<td>New fixture, new program, between short runs<\/td>\n<td>Availability<\/td>\n<\/tr>\n<tr>\n<td>First-article inspection<\/td>\n<td>Cell idle while part is verified off-line<\/td>\n<td>Availability<\/td>\n<\/tr>\n<tr>\n<td>Conservative feeds<\/td>\n<td>Program runs slower than rated for safety<\/td>\n<td>Performance<\/td>\n<\/tr>\n<tr>\n<td>In-cycle probing<\/td>\n<td>Frequent measurement cycles add time<\/td>\n<td>Performance<\/td>\n<\/tr>\n<tr>\n<td>Scrap and rework<\/td>\n<td>Bad part on titanium or forging, redo required<\/td>\n<td>Quality<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/figure>\n<blockquote>\n<p>At Hutchinson, a Tier-1 automotive supplier running 40 sites in 12 countries, real-time monitoring accompanied an OEE improvement from 42 to 75 percent, a gain of 33 points, which shows what trustworthy data delivers across high-mix discrete machining.<\/p>\n<\/blockquote>\n<div class=\"tt-cta\" style=\"background:#EB352C;color:#fff;border-radius:10px;padding:22px 24px;margin:28px 0;border-left:6px solid #FF674C\">\n<p style=\"margin:0 0 6px;font-weight:700;font-size:1.15em;color:#fff\">Prove it on one CNC cell, not in a slide deck<\/p>\n<p style=\"margin:0 0 14px;color:#fff\">Run a free 60-day pilot on a single high-mix cell and see the first hidden losses surface within about two weeks.<\/p>\n<p><a href=\"https:\/\/teeptrak.com\/fr\/contact\/\" style=\"display:inline-block;background:#fff;color:#EB352C;font-weight:700;padding:11px 22px;border-radius:6px;text-decoration:none\">Start a 60-day pilot<\/a><\/p>\n<\/div>\n<div class=\"teeptrak-asset-container tta-style-highlight\">\n<h3 class=\"tta-title\">Download the aerospace and defense OEE guide<\/h3>\n<p class=\"tta-subtitle\">The utilization-versus-OEE method, the CNC-cell loss table and an AS9100-friendly rollout plan. We send it to your work email.<\/p>\n<form id=\"tta-form-oeeaerospacedefenseas9100\" class=\"teeptrak-asset-form\" data-asset-id=\"oee-aerospace-defense-as9100\">\n<div style=\"position:absolute;left:-9999px;top:-9999px;width:1px;height:1px;overflow:hidden;\" aria-hidden=\"true\"><input type=\"text\" name=\"website_url\" tabindex=\"-1\" autocomplete=\"off\"><input type=\"text\" name=\"fax_number\" tabindex=\"-1\" autocomplete=\"off\"><\/div>\n<p><input type=\"hidden\" name=\"asset_id\" value=\"oee-aerospace-defense-as9100\"><br \/>\n<input type=\"hidden\" name=\"asset_label\" value=\"OEE for Aerospace and Defense Sector Guide\"><br \/>\n<input type=\"hidden\" name=\"pdf_url_en\" value=\"https:\/\/teeptrak.com\/wp-content\/uploads\/2026\/06\/oee-aerospace-defense-as9100.pdf\"><br \/>\n<input type=\"hidden\" name=\"pdf_url_fr\" value=\"\"><br \/>\n<input type=\"hidden\" name=\"pdf_url_cn\" value=\"\"><br \/>\n<input type=\"hidden\" name=\"pdf_url_de\" value=\"\"><br \/>\n<input type=\"hidden\" name=\"pdf_url_es\" value=\"\"><br \/>\n<input type=\"hidden\" name=\"pdf_url_nl\" value=\"\"><br \/>\n<input type=\"hidden\" name=\"page_url\" value=\"https:\/\/teeptrak.com\/en\/oee-aerospace-defense-as9100\/\"><\/p>\n<div class=\"tta-row tta-row-half\">\n<div class=\"tta-field\"><label>Pr\u00e9nom <span class=\"tta-required\">*<\/span><\/label><input type=\"text\" name=\"first_name\" required=\"\" autocomplete=\"given-name\"><\/div>\n<div class=\"tta-field\"><label>Nom <span class=\"tta-required\">*<\/span><\/label><input type=\"text\" name=\"last_name\" required=\"\" autocomplete=\"family-name\"><\/div>\n<\/div>\n<div class=\"tta-row\">\n<div class=\"tta-field\"><label>E-mail professionnel <span class=\"tta-required\">*<\/span><\/label><input type=\"email\" name=\"email\" required=\"\" autocomplete=\"email\"><\/div>\n<\/div>\n<div class=\"tta-row tta-row-half\">\n<div class=\"tta-field\"><label>Soci\u00e9t\u00e9 <span class=\"tta-required\">*<\/span><\/label><input type=\"text\" name=\"company\" required=\"\" autocomplete=\"organization\"><\/div>\n<div class=\"tta-field\"><label>Fonction<\/label><input type=\"text\" name=\"job_title\" autocomplete=\"organization-title\"><\/div>\n<\/div>\n<div class=\"tta-row\">\n<div class=\"tta-field\"><label>T\u00e9l\u00e9phone (facultatif)<\/label><input type=\"tel\" name=\"phone\" autocomplete=\"tel\"><\/div>\n<\/div>\n<div class=\"tta-row\"><label class=\"tta-consent\"><input type=\"checkbox\" name=\"consent_marketing\" value=\"1\"><span>J&#8217;accepte de recevoir occasionnellement les actualit\u00e9s de TeepTrak (d\u00e9sinscription \u00e0 tout moment).<\/span><\/label><\/div>\n<div class=\"tta-row\"><button type=\"submit\" class=\"tta-submit\">Get the guide in PDF<\/button><\/div>\n<div class=\"tta-legal\">En soumettant ce formulaire, vous acceptez notre politique de confidentialit\u00e9. Votre e-mail sert uniquement au suivi de ce t\u00e9l\u00e9chargement.<\/div>\n<div class=\"tta-message\" style=\"display:none;\"><\/div>\n<\/form>\n<\/div>\n<h2>From busy cells to a defensible number<\/h2>\n<p>Once availability, performance and quality are split per ISO 22400-2, the conversation in the production meeting changes. Instead of arguing whether a cell was busy, the team looks at why the same part loses time at setup or at inspection, and assigns an owner. PerfTrak puts that real-time number on a screen the operator reads in five seconds, which is what turns a metric into a habit.<\/p>\n<p>For an operations director, the value is a defensible OEE that survives an audit and a customer review. The data is captured the same way every shift, every reason code is consistent, and the trail explains itself, which matters as much to AS9100 as it does to throughput.<\/p>\n<h2>A rollout that respects certification<\/h2>\n<p>Start on one cell, keep the validated controls untouched, and let the edge device observe rather than control. First losses typically surface within about two weeks, and a well-scoped project pays back in 3 to 12 months as recovered machining capacity, which in aerospace is often worth more than the equivalent of a deferred capital purchase.<\/p>\n<p>Scale only after the pilot clears a clear bar on data trust and floor adoption. A number that operators and quality both believe is the one that moves OEE on the next cell and the one after that.<\/p>\n<ul>\n<li>Measure true OEE per ISO 22400-2, not spindle utilization, on every high-mix cell.<\/li>\n<li>Capture machine state and reason codes automatically so the data survives an AS9100 audit.<\/li>\n<li>Build the loss Pareto by part number to target setup, inspection and probing time.<\/li>\n<li>Pilot on one cell first, expect first losses in about two weeks, payback in 3 to 12 months.<\/li>\n<\/ul>\n<p><script type=\"application\/ld+json\">{\"@context\":\"https:\/\/schema.org\",\"@type\":\"Article\",\"headline\":\"OEE for Aerospace and Defense (AS9100)\",\"description\":\"Aerospace manufacturing OEE done right: separate utilization from true OEE on high-mix CNC cells, keep AS9100 traceability, and surface the first hidden losses in two weeks.\",\"inLanguage\":\"en\",\"author\":{\"@type\":\"Organization\",\"name\":\"TeepTrak\",\"url\":\"https:\/\/teeptrak.com\"},\"publisher\":{\"@type\":\"Organization\",\"name\":\"TeepTrak\",\"url\":\"https:\/\/teeptrak.com\",\"logo\":{\"@type\":\"ImageObject\",\"url\":\"https:\/\/teeptrak.com\/wp-content\/uploads\/teeptrak-logo.png\"}},\"datePublished\":\"2026-06-21\",\"mainEntityOfPage\":\"https:\/\/teeptrak.com\/en\/oee-aerospace-defense-as9100\/\"}<\/script><br \/>\n<script type=\"application\/ld+json\">{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Why is utilization a poor proxy for OEE in aerospace?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"High-mix, low-volume cells spend hours on setup, first-article inspection and probing that keep the spindle nominally busy without producing good parts at rate. ISO 22400-2 separates availability, performance and quality so those losses are visible. Reading utilization alone can overstate effectiveness and hide the real constraint on a CNC cell.\"}},{\"@type\":\"Question\",\"name\":\"Does real-time OEE monitoring affect AS9100 certification?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It should sit alongside the quality system, not inside the validated record path. A TeepTrak Box reads machine state at the edge with no PLC change, so the certified controls configuration is untouched. Automatic, time-stamped reason codes make the OEE data more consistent and more auditable, not less.\"}},{\"@type\":\"Question\",\"name\":\"What losses dominate a high-mix CNC cell?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Availability losses from setup, fixturing and first-article inspection between short runs, performance losses from conservative feeds and in-cycle probing, and quality losses from scrap or rework on high-value material. A Pareto of the Six Big Losses by part number shows which to attack first.\"}},{\"@type\":\"Question\",\"name\":\"How fast can we see results on a single cell?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A free 60-day pilot on one cell typically surfaces the first hidden losses within about two weeks. A well-scoped OEE project pays back in 3 to 12 months in recovered capacity, as documented cases such as Hutchinson, from 42 to 75 percent, illustrate across discrete machining.\"}}]}<\/script><br \/>\n<script type=\"application\/ld+json\">{\"@context\":\"https:\/\/schema.org\",\"@type\":\"Organization\",\"name\":\"TeepTrak\",\"url\":\"https:\/\/teeptrak.com\",\"description\":\"TeepTrak provides real-time OEE monitoring for manufacturing, with fast-install sensors that need no PLC, in line with the ISO 22400-2 standard.\"}<\/script><\/p>\n","protected":false},"excerpt":{"rendered":"<p>In aerospace and defense, the line is low-volume and high-mix, cycle times are long, and AS9100 demands traceability on every part. That mix hides a trap: a CNC cell can look busy all shift and still run a poor overall equipment effectiveness. This guide shows an operations director how to separate utilization from true OEE, [&hellip;]<\/p>\n","protected":false},"author":384731,"featured_media":117292,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":"","ai_seo_title":"OEE for Aerospace and Defense (AS9100) | TeepTrak","ai_meta_description":"Aerospace manufacturing OEE done right: separate utilization from true OEE on high-mix CNC cells, keep AS9100 traceability, and surface the first hidden losses in two weeks.","ai_focus_keyword":"aerospace manufacturing OEE","footnotes":""},"categories":[101],"tags":[],"class_list":["post-117416","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industrial-performance"],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v27.8 - https:\/\/yoast.com\/product\/yoast-seo-wordpress\/ -->\n<title>OEE for Aerospace and Defense (AS9100) | TeepTrak<\/title>\n<meta name=\"description\" content=\"Aerospace manufacturing OEE done right: separate utilization from true OEE on high-mix CNC cells, keep AS9100 traceability, and surface the first hidden losses in two weeks.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/teeptrak.com\/en\/oee-aerospace-defense-as9100\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"OEE for Aerospace and Defense (AS9100) | TeepTrak\" \/>\n<meta property=\"og:description\" content=\"Aerospace manufacturing OEE done right: separate utilization from true OEE on high-mix CNC cells, keep AS9100 traceability, and surface the first hidden losses in two weeks.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/teeptrak.com\/en\/oee-aerospace-defense-as9100\/\" \/>\n<meta property=\"og:site_name\" content=\"TEEPTRAK - Connect to your industrial potential\" \/>\n<meta property=\"article:published_time\" content=\"2026-06-21T19:08:20+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2026-06-21T19:08:26+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/teeptrak.com\/wp-content\/uploads\/2026\/06\/oee-aerospace-defense-as9100-og.png\" \/>\n\t<meta property=\"og:image:width\" content=\"1200\" \/>\n\t<meta property=\"og:image:height\" content=\"630\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/png\" \/>\n<meta name=\"author\" content=\"Ravinder Singh\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Ravinder Singh\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"4 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/teeptrak.com\\\/en\\\/oee-aerospace-defense-as9100\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/teeptrak.com\\\/en\\\/oee-aerospace-defense-as9100\\\/\"},\"author\":{\"name\":\"Ravinder Singh\",\"@id\":\"https:\\\/\\\/teeptrak.com\\\/en\\\/#\\\/schema\\\/person\\\/c21eb3a92f0f5429c796ab5cdcfee360\"},\"headline\":\"OEE for Aerospace and Defense (AS9100)\",\"datePublished\":\"2026-06-21T19:08:20+00:00\",\"dateModified\":\"2026-06-21T19:08:26+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/teeptrak.com\\\/en\\\/oee-aerospace-defense-as9100\\\/\"},\"wordCount\":908,\"publisher\":{\"@id\":\"https:\\\/\\\/teeptrak.com\\\/en\\\/#organization\"},\"image\":{\"@id\":\"https:\\\/\\\/teeptrak.com\\\/en\\\/oee-aerospace-defense-as9100\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/teeptrak.com\\\/wp-content\\\/uploads\\\/2026\\\/06\\\/oee-aerospace-defense-as9100-og.png\",\"articleSection\":[\"Industrial Performance\"],\"inLanguage\":\"en-US\"},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/teeptrak.com\\\/en\\\/oee-aerospace-defense-as9100\\\/\",\"url\":\"https:\\\/\\\/teeptrak.com\\\/en\\\/oee-aerospace-defense-as9100\\\/\",\"name\":\"OEE for Aerospace and Defense (AS9100) | TeepTrak\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/teeptrak.com\\\/en\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/teeptrak.com\\\/en\\\/oee-aerospace-defense-as9100\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/teeptrak.com\\\/en\\\/oee-aerospace-defense-as9100\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/teeptrak.com\\\/wp-content\\\/uploads\\\/2026\\\/06\\\/oee-aerospace-defense-as9100-og.png\",\"datePublished\":\"2026-06-21T19:08:20+00:00\",\"dateModified\":\"2026-06-21T19:08:26+00:00\",\"description\":\"Aerospace manufacturing OEE done right: separate utilization from true OEE on high-mix CNC cells, keep AS9100 traceability, and surface the first hidden losses in two weeks.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/teeptrak.com\\\/en\\\/oee-aerospace-defense-as9100\\\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/teeptrak.com\\\/en\\\/oee-aerospace-defense-as9100\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/teeptrak.com\\\/en\\\/oee-aerospace-defense-as9100\\\/#primaryimage\",\"url\":\"https:\\\/\\\/teeptrak.com\\\/wp-content\\\/uploads\\\/2026\\\/06\\\/oee-aerospace-defense-as9100-og.png\",\"contentUrl\":\"https:\\\/\\\/teeptrak.com\\\/wp-content\\\/uploads\\\/2026\\\/06\\\/oee-aerospace-defense-as9100-og.png\",\"width\":1200,\"height\":630},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/teeptrak.com\\\/en\\\/oee-aerospace-defense-as9100\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Accueil\",\"item\":\"https:\\\/\\\/teeptrak.com\\\/en\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"OEE for Aerospace and Defense (AS9100)\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/teeptrak.com\\\/en\\\/#website\",\"url\":\"https:\\\/\\\/teeptrak.com\\\/en\\\/\",\"name\":\"TEEPTRAK\",\"description\":\"TEEPTRAK official website - OEE\",\"publisher\":{\"@id\":\"https:\\\/\\\/teeptrak.com\\\/en\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/teeptrak.com\\\/en\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/teeptrak.com\\\/en\\\/#organization\",\"name\":\"TEEPTRAK\",\"url\":\"https:\\\/\\\/teeptrak.com\\\/en\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/teeptrak.com\\\/en\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/teeptrak.com\\\/wp-content\\\/uploads\\\/2023\\\/05\\\/cropped-Capture-decran-2023-05-04-112832.png\",\"contentUrl\":\"https:\\\/\\\/teeptrak.com\\\/wp-content\\\/uploads\\\/2023\\\/05\\\/cropped-Capture-decran-2023-05-04-112832.png\",\"width\":512,\"height\":512,\"caption\":\"TEEPTRAK\"},\"image\":{\"@id\":\"https:\\\/\\\/teeptrak.com\\\/en\\\/#\\\/schema\\\/logo\\\/image\\\/\"},\"sameAs\":[\"https:\\\/\\\/www.linkedin.com\\\/company\\\/teeptrak\\\/\",\"https:\\\/\\\/www.linkedin.com\\\/company\\\/teeptrakinternational\\\/\"]},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/teeptrak.com\\\/en\\\/#\\\/schema\\\/person\\\/c21eb3a92f0f5429c796ab5cdcfee360\",\"name\":\"Ravinder Singh\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/afa004471ac2dcd20a0bfe626e1cfd4d06876c592f2b766fca708c3d717a3d13?s=96&d=mm&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/afa004471ac2dcd20a0bfe626e1cfd4d06876c592f2b766fca708c3d717a3d13?s=96&d=mm&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/afa004471ac2dcd20a0bfe626e1cfd4d06876c592f2b766fca708c3d717a3d13?s=96&d=mm&r=g\",\"caption\":\"Ravinder Singh\"},\"url\":\"https:\\\/\\\/teeptrak.com\\\/en\\\/author\\\/ravinder-teeptrak\\\/\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"OEE for Aerospace and Defense (AS9100) | TeepTrak","description":"Aerospace manufacturing OEE done right: separate utilization from true OEE on high-mix CNC cells, keep AS9100 traceability, and surface the first hidden losses in two weeks.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/teeptrak.com\/en\/oee-aerospace-defense-as9100\/","og_locale":"en_US","og_type":"article","og_title":"OEE for Aerospace and Defense (AS9100) | TeepTrak","og_description":"Aerospace manufacturing OEE done right: separate utilization from true OEE on high-mix CNC cells, keep AS9100 traceability, and surface the first hidden losses in two weeks.","og_url":"https:\/\/teeptrak.com\/en\/oee-aerospace-defense-as9100\/","og_site_name":"TEEPTRAK - Connect to your industrial potential","article_published_time":"2026-06-21T19:08:20+00:00","article_modified_time":"2026-06-21T19:08:26+00:00","og_image":[{"width":1200,"height":630,"url":"https:\/\/teeptrak.com\/wp-content\/uploads\/2026\/06\/oee-aerospace-defense-as9100-og.png","type":"image\/png"}],"author":"Ravinder Singh","twitter_card":"summary_large_image","twitter_misc":{"Written by":"Ravinder Singh","Est. reading time":"4 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/teeptrak.com\/en\/oee-aerospace-defense-as9100\/#article","isPartOf":{"@id":"https:\/\/teeptrak.com\/en\/oee-aerospace-defense-as9100\/"},"author":{"name":"Ravinder Singh","@id":"https:\/\/teeptrak.com\/en\/#\/schema\/person\/c21eb3a92f0f5429c796ab5cdcfee360"},"headline":"OEE for Aerospace and Defense (AS9100)","datePublished":"2026-06-21T19:08:20+00:00","dateModified":"2026-06-21T19:08:26+00:00","mainEntityOfPage":{"@id":"https:\/\/teeptrak.com\/en\/oee-aerospace-defense-as9100\/"},"wordCount":908,"publisher":{"@id":"https:\/\/teeptrak.com\/en\/#organization"},"image":{"@id":"https:\/\/teeptrak.com\/en\/oee-aerospace-defense-as9100\/#primaryimage"},"thumbnailUrl":"https:\/\/teeptrak.com\/wp-content\/uploads\/2026\/06\/oee-aerospace-defense-as9100-og.png","articleSection":["Industrial Performance"],"inLanguage":"en-US"},{"@type":"WebPage","@id":"https:\/\/teeptrak.com\/en\/oee-aerospace-defense-as9100\/","url":"https:\/\/teeptrak.com\/en\/oee-aerospace-defense-as9100\/","name":"OEE for Aerospace and Defense (AS9100) | TeepTrak","isPartOf":{"@id":"https:\/\/teeptrak.com\/en\/#website"},"primaryImageOfPage":{"@id":"https:\/\/teeptrak.com\/en\/oee-aerospace-defense-as9100\/#primaryimage"},"image":{"@id":"https:\/\/teeptrak.com\/en\/oee-aerospace-defense-as9100\/#primaryimage"},"thumbnailUrl":"https:\/\/teeptrak.com\/wp-content\/uploads\/2026\/06\/oee-aerospace-defense-as9100-og.png","datePublished":"2026-06-21T19:08:20+00:00","dateModified":"2026-06-21T19:08:26+00:00","description":"Aerospace manufacturing OEE done right: separate utilization from true OEE on high-mix CNC cells, keep AS9100 traceability, and surface the first hidden losses in two weeks.","breadcrumb":{"@id":"https:\/\/teeptrak.com\/en\/oee-aerospace-defense-as9100\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/teeptrak.com\/en\/oee-aerospace-defense-as9100\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/teeptrak.com\/en\/oee-aerospace-defense-as9100\/#primaryimage","url":"https:\/\/teeptrak.com\/wp-content\/uploads\/2026\/06\/oee-aerospace-defense-as9100-og.png","contentUrl":"https:\/\/teeptrak.com\/wp-content\/uploads\/2026\/06\/oee-aerospace-defense-as9100-og.png","width":1200,"height":630},{"@type":"BreadcrumbList","@id":"https:\/\/teeptrak.com\/en\/oee-aerospace-defense-as9100\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Accueil","item":"https:\/\/teeptrak.com\/en\/"},{"@type":"ListItem","position":2,"name":"OEE for Aerospace and Defense (AS9100)"}]},{"@type":"WebSite","@id":"https:\/\/teeptrak.com\/en\/#website","url":"https:\/\/teeptrak.com\/en\/","name":"TEEPTRAK","description":"TEEPTRAK official website - OEE","publisher":{"@id":"https:\/\/teeptrak.com\/en\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/teeptrak.com\/en\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/teeptrak.com\/en\/#organization","name":"TEEPTRAK","url":"https:\/\/teeptrak.com\/en\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/teeptrak.com\/en\/#\/schema\/logo\/image\/","url":"https:\/\/teeptrak.com\/wp-content\/uploads\/2023\/05\/cropped-Capture-decran-2023-05-04-112832.png","contentUrl":"https:\/\/teeptrak.com\/wp-content\/uploads\/2023\/05\/cropped-Capture-decran-2023-05-04-112832.png","width":512,"height":512,"caption":"TEEPTRAK"},"image":{"@id":"https:\/\/teeptrak.com\/en\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.linkedin.com\/company\/teeptrak\/","https:\/\/www.linkedin.com\/company\/teeptrakinternational\/"]},{"@type":"Person","@id":"https:\/\/teeptrak.com\/en\/#\/schema\/person\/c21eb3a92f0f5429c796ab5cdcfee360","name":"Ravinder Singh","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/secure.gravatar.com\/avatar\/afa004471ac2dcd20a0bfe626e1cfd4d06876c592f2b766fca708c3d717a3d13?s=96&d=mm&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/afa004471ac2dcd20a0bfe626e1cfd4d06876c592f2b766fca708c3d717a3d13?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/afa004471ac2dcd20a0bfe626e1cfd4d06876c592f2b766fca708c3d717a3d13?s=96&d=mm&r=g","caption":"Ravinder Singh"},"url":"https:\/\/teeptrak.com\/en\/author\/ravinder-teeptrak\/"}]}},"_links":{"self":[{"href":"https:\/\/teeptrak.com\/en\/wp-json\/wp\/v2\/posts\/117416","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/teeptrak.com\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/teeptrak.com\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/teeptrak.com\/en\/wp-json\/wp\/v2\/users\/384731"}],"replies":[{"embeddable":true,"href":"https:\/\/teeptrak.com\/en\/wp-json\/wp\/v2\/comments?post=117416"}],"version-history":[{"count":1,"href":"https:\/\/teeptrak.com\/en\/wp-json\/wp\/v2\/posts\/117416\/revisions"}],"predecessor-version":[{"id":117431,"href":"https:\/\/teeptrak.com\/en\/wp-json\/wp\/v2\/posts\/117416\/revisions\/117431"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/teeptrak.com\/en\/wp-json\/wp\/v2\/media\/117292"}],"wp:attachment":[{"href":"https:\/\/teeptrak.com\/en\/wp-json\/wp\/v2\/media?parent=117416"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/teeptrak.com\/en\/wp-json\/wp\/v2\/categories?post=117416"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/teeptrak.com\/en\/wp-json\/wp\/v2\/tags?post=117416"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}